Diamond Drill Bits Set of 10

Diamond Drill Bits Kit Arbor 5/8-Inch-11 for Porcelain Tile Ceramic Marble Brick Vacuum Brazed Core Drill Bits Set

10-piece set

• 8-Piece Core Drill bits: (1/4″,5/16″,3/8″,1/2″,3/4″,1″,1-1/4″,2″)

• 1-Piece 10mmthread Finger Bit

• 1-Piece 5/8-11male thread ToSDS Adapter

Specification:
1.Core Drill Bits:
Diameter 6/8/10/13mm35mm Max working depth, 10mm Diamond height, Total Length 62mm, with Wax inside helps cooling the bits
Diameter 19/25/32/51mm50mm Max working depth, 15mm Diamond height, Total Length 75mm
Core bits Arbor: 5/8-Inch-11

2. Diamond Finger Bits:
10MM Diameter, 50MM workable length, 5/8-11 thread, Total Length: 75mm, Grit #50/60

3.SDS Adapter:
This Adapter could change the connection of diamond bits from 5/8-Inch-11 to SDS

Application:
Dry/wet drilling for porcelain tile, granite, marble, stone, Masonry, brick…
Recommended Machine: Angle Grinder

Feature:
1. Minimizing any breakage and safe for operator
2. High quality Diamond Grain provide fast and smooth drilling
3. Vacuum Brazed technology provide much longer working life than electroplated technology

================THE END================

Operation Tips for Vacuum Brazed Diamond Drill core bits
1.Do not use these drill bits with hammer mode
2.Only fit these drill bits on a cord drill, not cordless not enough power)
3.Only for tile drilling does not recommend for the material behind the tile
4.For horizontal drilling, just give a gentle pressure
For vertical drilling, the weight of the machine will give sufficient pressure
5.Start drilling as per following instructions:
1) Place the drill at a 45-degree angle
2) Drilling till the hole start to form
3) Bring the drill up into upright position
4) Continue to drill and swaying the machine along a circle